Home | Contact | Sitemap | Admin
  • > 두께측정 관련기기
  • > 코팅 두께측정기
  • > LIST-MAGNETIK GmbH
  • > Coating Thickness Meters
Portable Coating Thickness Meters
Art.-No. MEGA-CHECK Basic/Profi/Master Series
모델명 Art.-No. MEGA-CHECK Basic/Profi/Master S
제조사 LIST MAGNETIK GmbH
원산지 독일
분류명 코팅도막두께측정기

* Specifications


Applications:

Depending on the selection of the probe measurement of paint, varnish, plastic and galvanic layers on steel, measurement of insulating layers on non-ferrous metals with automatic recognition of the basic material

Standards:ISO 2178, ISO 2360, BS 5411, ASTM
Measuring probe:

The measuring range is depending on the probe,

on steel and iron up to 30 mm (30,000 μm),
on NFE metals up to 6 mm (6000 μm).
Minimum area, minimum radius of curvature and calibration value also depend on the probe.

Accuracy:

Less than 100 μm ± 1 μm,  100-1000 μm : ± 1%,  1000-2000 μm : ± 3%,  > 2000 μm:  ± 5%

Resolution:1-100 μm : 0.1 μm,  100-1000 μm : 1 μm,  > 1000 μm : 10 μm
Measuring units:µm and mils
Environment temperature:0 - 50° C
Display:Graphic display
Multilingual menu navigation:German / English / Spanish / Dutch
Power supply:3x 1.5 V AA Mignon
Operating time:approx. 60 hours
Dimensions:200 x 95 x 41 mm
Weight:265 g (with batteries)

For the MEGA-CHECK Profi and Master devices additionally:

Data logger:10,000 measurements (In MEGA-CHECK Master divisible into 100 batches)
Statistics:Count / Maximum / Minimum / Average / Standard deviation
Calibration memory:3 calibration memories for storing individual calibrations /td>
Interface:RS232 interface with USB cable for communication with PC and printer

For the MEGA-CHECK Master device:

Analog display:Analog measured value display with continuous measurement
Scan function:for accurate measurement on rough or blasted surfaces
Duplex function:

for the exact determination of the individual layer thickness for measurements of insulating layers on galvanized steel parts (the zinc layer must be > 60 μm)


* Scope of supply


MEGA-CHECK Basic :  The probe must be ordered separately.

without probe, with probe cable, calibration base plates FE + NFE, 2 calibration foils and case, including calibration certificate.


MEGA-CHECK Profi : The probe must be ordered separately.

without probe, with probe cable, USB cable, calibration base plates FE + NFE, 2 calibration foils and case, including calibration certificate.


MEGA-CHECK Master : The probe must be ordered separately.

without probe, with probe cable, USB cable, calibration base plates FE + NFE, 2 calibration foils and case, including calibration certificate.


* Optional Accessories (별매품)

No. Art.-No.  Model Description
1 Art.-No. 1121 CFSC Calibration Foil Set with Certificate (30, 50, 100, 300, 1000 μm)
2 Art.-No. 9603 TOP-PRINT4 Thermal Printer with Charger
3 Art.-No. 9612 TOP-PRINT4P-10 Thermo Paper Roll (10 ea / 1 pack)
4 Art.-No. 1110 CBP-FE Calibration Bsae Plate FE (Blue)
5 Art.-No. 1111 CBP-NFE Calibration Bsae Plate NFE (Red)
6 Art.-No. 1120A CF-300 Calibration Foil 300 µm
7 Art.-No. 1120B CF-100 Calibration Foil 100 µm
8 Art.-No. 9320 RPC Replacement Probe Cable. Length : 80 cm.
9 Art.-No. 9334 USB-IFCB USB Interface Cable for RS232 Port


파일명 확장자 다운로드
 MEGA-CHECK_TRANSFER_V31_Setup.exe (2MB)
 Art.-No. MEGA-CHECK Series[Brochure].pdf (2MB)


상호 : 주식회사 마스  |  (우)13209 경기도 성남시 중원구 사기막골로 45번길 14 우림2차 A-1610호   |   Tel : 031-735-6310 / 6320   |   Fax : 031-735-6334
대표이사 / 개인정보관리책임자 : 안승만   |   사업자등록번호 : 129-86-80575   |   통신판매업등록번호 : 제2013-경기성남-0854호   |   메일 : mmm@m-m.co.kr

COPYRIGHT© MAS CO.,LTD. ALL RIGHTS RESERVED.