Item | Specification |
|---|
Input range | 0 to 500m/s2 |
|---|
Measuring range of frequency | E accerelation | 10 Hz to 1 kHz
Band pass filter：500 Hz to 10 kHz
See instruction manual "10-2. Standard Characteristic of Converter" |
|---|
| Velocity | 10 Hz to 1 kHz (ISO 2954:2012 Filter characteristics compliant)
See instruction manual "10-2. Standard Characteristic of Converter" |
Measuring range* | E accerelation | □ 10 m/s2E rms
□ 25 m/s2E rms
■ 50 m/s2E rms
□ 100 m/s2E rms |
|---|
| Velocity | □ 10 mm/s rms
□ 25 mm/s rms
■ 50 mm/s rms
□ 100 mm/s rms |
Connect sensor* | ■ VP-100
□ VP-8021A |
|---|
DC output* | E accerelation | ■ 4-20 mA (Load 500 Ω or lower)
□ 0-10 V (Load 100 kΩ or higher) |
|---|
| Velocity | ■ 4-20 mA (Load 500 Ω or lower)
□ 0-10 V (Load 100 kΩ or higher) |
AC output | E accerelation | 0-1 Vrms (Load 100 kΩ or higher) |
|---|
| Velocity | 0-1 Vrms (Load 100 kΩ or higher) |
Linearity | DC output | Within ±3%F.S |
|---|
| AC output | Within ±5% |
Sensor waveform output | Depends on sensor voltage sensivitity
Vias voltage: 9 VDC |
|---|
Operating temperature/humidity range | 0 to 50℃、95%RH or less (without freezing or condensing） |
|---|
Suitable cable of terminal block | 0.2 to 2.5mm2 (single wire/standard wire)
(AWG12 to 24) |
|---|
Power supply of converter | DC24 V ±10% |
|---|
Power supply of sensor | DC24 V 3.5 mA ±20% |
|---|
Power comsumption | 3W or less |
|---|
Case material | Resin |
|---|
Size | 22.6 (W) x 99 (H) x113.6 (D) mm (Excluding protrusions) |
|---|
Mass | Approx.150 g |
|---|
