* Specifications
The Hydro-Mix XT-EX has been designed to measure moisture in flowing bulk solids such as animal feed, grain, rice, pulses and also in liquids.
The sensor can be easily installed in ducting, conveying and mixing systems.
It is suitable for Zone 20 process environments (Zone 21 external to process).
Construction :
Body : 316 Stainless Steel.
Faceplate : Ceramic.
Internal Seals : EPDM FDA Approved O-Rings.
Fixing Plate O-Ring : EPDM FDA Approved.
Fixing : The sensor is flush mounted with the internal wall of the installation using the included mounting assembly.
Measurement Range :
Moisture : 0 to 100%, material dependant.
Depth : Approx. 75 to 100mm, material dependant.
Measurement Modes : Choice of modes for optimising sensor performance.
Temperature :
Operating Temperature Range : -20 to 60°C
Moisture Detection Range : 0 to 60°C
Refresh Rate : 25 times per second
Analogue Outputs :
Two Configurable 4 to 20mA or 0 to 20mA current loop source available for moisture and temperature.
May also be converted to 0 to 10V DC.
Digital Inputs/Output :
Two configurable digital signals available for averaging and alarm functions.
Digital (Serial) Communication :
Opto-Isolated RS485 2-Wire port.
RS232, Ethernet and USB converters available.
Programming details to access sensor values and parameters are available on request.
Environmental :
Pressure : Full Vacuum(-1) to 5 Bar pressure.
Protection : Cable Gland IP68.
Integrated Cable :
4m, Six twisted pairs, 22AWG, 0.35mm^2 conductors.
Screen braid with 65% minimum coverage plus aluminium/polyester foil.
Maximum recommended cable run of 100m.
Power Supply : +15V to +30V DC, 4W.
Ratings :
ATEX : Ex II 1/2D.
IECEx : Zn 20/21 AEx ta/tb IIIC T200 115°C Da/Db.
ETL : Cl II, Div 1/2Grps E, F, G T115°C.