* Specifications

PROGRAMMED TEST TYPES : Wet / Dry / SCOF / DCOF (Flying Heel or User-defined Test Run Distance)

Measurement Velocity (DCOF) : 20cm/s ± 5% 

Measurement Range : 0.01 to 1.00 DCOF 

Measurement Normal Force : 22.4N ± 2% 

Contact Patch : Approx. 3mm X 28mm 

Measurement System Tolerance : 3% 

DCOF Measurement Distance : 10 to 50cm, Incremental by 5cm (Displays 4” to 20”) 

Ramp Angle : 9.6 Degrees Maximum (Declination) 

Verification Mass : 1.36 Kg 

Operating/Storage Temp : 5 to 40 deg. C 

Operating/Storage Humidity : 5 to 90% RH (Non-Condensing) 

Internal Memory : 1000+ Measurements 

Display : 480 x 272 LCD TFT Display with 262K Colors, LED Backlit 

Test Data Storage/Transfer : USB Flash Drive, 8MB Max. 

Transferred File Formats : PDF, TXT/CSV (.LOG files) 

Printer : Thermal, 48 mm Wide, 8 dots/mm 

Processor Type : ARM Cortex M4 32 bit Processor, 120 MHz 

Sampling Rate : 1000 samples / sec 

Protection Class : IP20 

Power Source : RSI Battery Pack (NiMH Battery, 12V Nominal, 3.8Ah) 

Battery Pack Charger : 120-240VAC 50/60 Hz Input

Weight : 6.8 Kg

Device Dimensions : 29 x 20 x 17cm 

* BASIC* KIT Consist of [제조사 사정으로 구성품 내역은 사전에 공지없이 변경될 수 있습니다.]

1 - BOT-3000E Digital Tribometer(Bluetooth Enabled)

1 - Verification Mass

1 - Collapsable Bucket(Under Unit)

2 - 12V, 2000mAh NiMH Smart Battery Packs

1 - Empty Bottle for SLS/Water Solution

1 - Sensor Sanding Tool & 2 - Strips of Sandpaper

2 - SBR Sensors

2 - Vials of SLS

3 - Rolls of Paper

1 - Chip Brush

1 - Sanding Pad

4 - Replacement Bumpers

1 - USB Flash Drive

1 - Battery Charger & Power Cord

1 – Korean/English Instruction Manual

파일명	확장자	다운로드
자주하는 질문.pdf (125KB)		down
Art.-No. BOT-3000E-XT[English Brochure].pdf (1MB)		down
ANSI A326.3-2021[Documents].pdf (18MB)		down